With over a decade of experience in building high performance DCT transmissions, you can trust our experts with the process of building your DL800 Dual Clutch Transmission for your second generation Audi R8 or Lamborghini Huracan. Our long standing relationship with Dodson Motorsport and years of racing experience has allowed us to develop reliable and tested solutions for your specific needs. Our approach is simple, we are not going to make 5 or 6 different stages of transmission for you to choose from when we know there are only a few options that you need in order to race your super car with confidence. With our expert team, we have developed our packages to keep it simple for our clients to understand, no fluff and no combinations we do not stand behind. Colab Garage will manage the complete process for you including providing transport logistics for your DL800 transmission to our shop all the way to shipping your entire vehicle for a true door-to-door turn key solution.

The Colab Garage KS1 for the DL800 is the pinnacle of what is available from Dodson Motorsport to upgrade the DCT transmission for the Audi R8 and Lamborghini Huracan for extreme duty use. As the name implies, the Kitchen Sink One, includes absolutely everything that you can throw at this transmission to withstand the abuse of the demands of launching your vehicle at the drag strip and putting 1000+ lbft of torque to the ground. Designed for max effort forced induction applications , the KS1 transmission package can give you piece of mind when pushing for that 7 second quarter mile pass and 200+mph roll race trap speeds.

COMPLETE TRANSMISSION SOLUTIONS

• SEND YOUR ASSEMBLED TRANSMISSION OR YOUR ENTIRE VEHICLE AND OUR EXPERTS WILL HANDLE THE REST

• EVERYTHING INCLUDING THE KITCHEN SINK - ZERO COMPROMISES

• 1000+ LB-FT RATING

• RUN 7 SECOND QUARTER MILES AND ACHIEVE 200MPH TRAP SPEEDS WITH CONFIDENCE

• DIRECT BOLT-IN SOLUTION, NO PERMANENT MODIFICATIONS REQUIRED

• INTENDED FOR MAX EFFORT FORCED INDUCTION APPLICATIONS

Dodson Motorsport Promax Clutch

We start with using the Dodson Motorsport Promax Clutch. This unit is complete with billet baskets, outer cage, and cover drive unit which are all prone to failure even at moderate increases in power. This comprehensive design steps things up from a standard street solution and is the only clutch we recommend for the DL800. The Promax allows for several configurations of the clutch pack itself providing the highest level of engine torque holding capability for the DL800 while still providing the ability to be mild-mannered and streetable.

Dodson Motorsport Full Billet 1-7 Gearset and Shafts

The Colab Garage KS1 is complete with the addition of a full billet 1-7 gear and shaft set from Dodson Motorsport. When going for the fastest 60-130mph times you can achieve on the street or launching your car at the drag strip this full billet solution eliminates another common failure point pushing for every last bit of ET and trap speed.

Additional Included Dodson Motorsport Upgrades

We then add the rest of the Dodson Motorsport catalog to the build which gives our DL800 package the KS1 designation. Starting with the drag racing essentials of both the Dodson upgraded half shafts and Wavetrac rear limited slip differential. Also included in the KS1 is the Dodson Motorsport Billet Ring and Pinion which is essential when launching at the drag strip. From there we add the Dodson billet sump pan and rear differential cover for added strength and durability and finish it up by using the Dodson titanium bolt kit to ensure everything is held together properly and can be serviced in the future. The Colab Garage KS1 also adds our proprietary modifications which aid in reliability and strength to the oiling system components. Every KS1 DL800 gearbox is cleaned using our omega sonic cleaner for all components including cleaning of your mechatronic unit and oil pump assembly to ensure proper operation prior to installation.

KS1 Build Includes:

• Dodson Motorsport DL800 Promax Clutch Kit (9/9 clutch pack standard)

• Dodson Motorsport Full 1-7 Billet Gear Set and Shafts (w/ upgraded one piece 2nd gear)

• Dodson Motorsport Rear Case Plugs, Rear Pinion Nut, and Mechanical Clip Upgrade

• Dodson Motorsport Shaft Speed Sensor Kit

• Dodson Motorsport Billet Trans Pan w/ Serviceable Filter

• Dodson Motorsport Reusable Canister Metal Mesh Transmission Filter

• Dodson Motorsport Half Shaft Kit

• Dodson Motorsport Billet Ring and Pinion

• Wavetrac Limited Slip Rear Differential

• 14 Quarts of OEM DCT Fluid

• Dodson Motorsport Titanium Bolt Kit

• Colab Garage Internal Oiling Modifications

• Colab Garage Disassembly, Inspection, Sonic Cleaning, and Assembly Service